Hot Sell Copper Conductor XLPE Insulation Halogen Free Flame Retardant Power Cable

Model Number:  WDZ-YJE,WDZ-YJE23 
Insulation Material:  XLPE  Type:  Low Voltage  Application:  Construction 
Conductor Material:  Copper  Jacket:  PVC  Standard:  GB/T19666-2005,IEC60332-3 
Packaging & Delivery Packaging Detail: wooden drum or iron wooden drum
Delivery Detail: 10 days for 50000 meters,specific time according to the quantity

Specifications 1~Flame retardant grade:A&B&C standard IEC60332-3
2~Voltage:0.6/1kV,450/750V
3~Armour:steel wire,steel tape
4~ISO9001,14001

Copper Conductor XLPE Insulation Halogen Free Flame Retardant Power Cable

1. Property Scope of Application

Non-halogen Low Smoke Flame Retardant Wire & Cable, may prevent human from being suffocated by toxic gas generated

from accidental burning of wire and cable. They are suitable for using in the circumstance with fairly strict flame retardant and environmental protection requirement, such as high-rise buildings, hospitals, subways and shopping malls.

2. Requirement of Application

2.1. The permissible long-time working temperature of regular non-halogen low smokie flame-retardant polyolefin insulation is not

       more than 70C, and that of irradiation cross-linked non-halogen low-smoke flame-retardant olefin insulation is not more than

       105 C. The temperature of laying cable is not lower than 0C.

2.2. The permissible min curving radius during laying cable are as following:

       A: The permissible min. Curving radius for single-core power cable is 20(D+d)mm. If the main conductor is not round, then

            the "d" is 1.13S where the "D"stands for actual outer diameter of cable, the "d"stands for actual outer diameter of conductor

            and the "S" stands for nominal sectional area of main conductor;

       B: The permissible curving radius is not less than 4D for the cable whose outer diameter(D) is less than 25mm; And that is

            not less than 6D for the cable whose outer diameter(D) is not less than 25mm;

       C: The permissible curving radius is at least 6 times outer diameter of unarmored control cable, and that is at least 12 times

            outer diameter of armored and copper-tape screened cable armoured control cables; At least 12 times the cable.